Alarm/security

Alarm/security

It is possible to bypass zones directly from WebCardio. This feature is available with the Premium service only.

When in the ALARM section press the Bypass button that allows to check the status of all security zones of the Cardio system:

– When getting into the Bypass screen if the color of a button of a zone is green then the zone is in the right position and ready to be armed. To bypass it press the very same button so that the color turns red and then press the yellow button “Bypass” at the bottom to validate and return to the Alarm screen.

– When getting into the screen if the color is grey then the zone is inactive and its status cannot be changed.

Following this process of bypassing security zones, activating the alarm is the same.

When zones are not ready or bypassed a black/yellow border surrounds the edge of the bypass button in the Alarm page.

When disarming the security all zones that had been manually bypassed (red) previously via WebCardio return to their original status (green) if they are ready to be armed again or red if not.

A small H button appears on the right of the Security page. This button gives access to all security events that took place between two armed modes. When zones are bypassed the information appears with N (normal) and Y (bypassed).

secant
No Comments

Post a Comment

Comment
Name
Email
Website